€0.00
Clean separation in the digital workflow

Clean separation in the digital workflow

Clean separation in the digital workflow

optiprint iso 3D from dentona: Sprayable model isolation for printed models

With optiprint iso 3D dentona (Dortmund) is expanding the optiprint family with a pragmatic solution for everyday laboratory work: the isolation of printed models for processing dental resins. The ready-to-use model isolation has been specially developed for 3D-printed models and forms a wafer-thin, uniform separating layer to auto- and cold-curing polymers such as PMMA. optiprint iso 3D is non-absorbent, maintains the detail accuracy of the model and enables clean, residue-free separation of model and resin after polymerisation. It is applied sparingly and evenly from the spray bottle. 

The model is rotated in the spray mist to achieve a homogeneous wetting. If puddles form, excess material can be carefully removed with compressed air. After a short drying time of about one to two minutes, the dental resin can be processed. The cured resin objects can be easily and residue-free separated; cleaning is carried out using standard laboratory procedures such as a steam jet or ultrasonic device.

Advantages at a glance:

  • Insulates 3D-printed models against denture and orthodontic resins (PMMA) 
  • Ultra-fine film with short drying time 
  • Harmless to health and can be removed without leaving any residue

optiprint iso 3D is part of the optiprint family – dentona's system solution for dental 3D printing. The wide range of resins covers almost every application. All optiprint materials are based on dental materials expertise and are researched, developed and produced in Dortmund.

optiprint iso 3D von dentona

3D printing tutorial #1

Successful printing processes

In 3D printing, the success of the printing process depends on many factors - material, printing speed, temperature, layer thickness, etc. An often underestimated but crucial component for the success of the printing process is the material tray. This inconspicuous component plays a key role in whether the 3D printed object succeeds or fails. But why is this the case? And what can be done to keep the material tray in optimum condition?

What makes the material tray so important?

Damage or soiling of the tray can drastically affect the print result - from blurred details to complete misprints. It becomes particularly problematic if the thin FEP film covering the base of the tray becomes worn or dirty. This film is the only separating element between the resin and the UV light source that cures the material.

The role of the FEP film

The FEP film is made of a special material that is both UV-permeable and tear-resistant. It enables the resin to cure evenly and serves as a non-stick surface on which the individual layers of the 3D print are built up. However, this film is also extremely susceptible to wear. Scratches, cracks or dirt on the film can lead to light scattering and thus to uneven curing of the resin. Mechanical forces act on the film during movement. Over time, indentations or deformations can form in the film, which impair light transmission and lead to inaccuracies, resulting in blurred details, unclean edges and possibly completely unsuccessful prints.

Getrübte FEP Folie

How to prevent printing errors due to the material tray

Caution: Always wear nitrile gloves when handling liquid resin!

1. regular cleaning
The tray should be thoroughly cleaned regularly and always after a misprint to remove residual material. A soft silicone spatula helps to remove the resin without damaging the film. Make sure that the tray is also cleaned from below, as even small resin residues at the bottom can lead to scattered light. Isopropanol is ideal for cleaning the film and the base of the tray without leaving any residue.

2. filter the resin
When cleaning, make sure that the resin is free of particles. Filtering the resin with a varnish filter (approx. 190 μm) prevents hardened plastic particles or dirt from impairing the print result.

Tip: "Do it yourself" - dentona offers a CAD file for a practical screw-on funnel suitable for the optiprint aluminium bottles. The file can be downloaded free of charge at www.dentona.de.

3. check the condition of the FEP film
Scratches, cracks or a milky discolouration of the film are clear signs that the film / material tray needs to be replaced. The film should be inspected against the light as often as possible to ensure that there is no damage. Regular inspection will give you a sense of when the film has reached the end of its service life.

Getrübte FEP Folie

Conclusion: Small changes, big impact

The material tray may appear to be a simple component at first glance, but its impact on the printing process is immense. A poorly maintained or damaged material tray can disrupt the entire printing process and affect the result. Regular maintenance, cleaning and filtering of the resin can ensure that the material tray delivers optimum printing results for a long time.

With simple measures, problems can be recognised and rectified at an early stage. Stay tuned to ask dentona - here, solutions for everyday challenges in the dental laboratory are explained step by step - compact, practical and directly implementable.

Further contributions
  • Around 15 people are standing in a modern, bright room, looking left towards the speaker. A man in a light blue jacket gestures before a large blue board with a world map and text like ‘VISION’. Certificates are visible on the right.
    Recap: Why we travel all the way to China with our customers
    9 July 2026
    27 dental technicians, a week in China and countless new experiences: together with our long-standing partner Aidite, we at dentona organised a custom...
    Read more
  • A blonde woman with short hair is speaking on stage whilst wearing a headset. On the left, members of the audience are seated at a table. The ‘ dentona ’ logo is visible in the background.
    That was d.connect 2026: Anything is possible. So what next?
    6 July 2026
    Fully booked. Inspiring discussions. And plenty of new perspectives.  Dental technology has probably never been as advanced as it is today. Tha...
    Read more
  • LabMag cover: black top with logo + “dentona’s magazine for dental technology”; red bottom with “Who will be copying whom in future?” and “Dental technology in 2026 – an uncomfortable question”.
    LabMag: Who will be copying whom in the future?
    Julian Schaumann | 2 July 2026
    Artificial intelligence, automation, digital processes – we’ve covered these topics many times before. And yes: here we go again. Not because AI is a ...
    Read more
  • LabMagazin front cover: Dark grey top with white LabMag logo and ‘dentona’s magazine for dental technology’. Red section with articles ‘Next-gen dental technology’, ‘Dental prostheses: price or prospects’ and ‘The blind spot’. Email icon bottom right.
    LabMag: Between everyday lab life, high standards and change
    Julian Schaumann | 16 June 2026
    There are plenty of new products. What is rarely discussed honestly, however, are the tangible changes behind them. A digital magazine from dentona ad...
    Read more
  • A lecture in a large hall, viewed from the back of the audience. A speaker stands by a large screen, presenting on machine learning. The ceiling has red lights, pipes and ventilation ducts; the audience listens attentively.
    d.connect 2026: Anything is possible. So what now?
    Julian Schaumann | 12 June 2026
    Dental technology is changing. With d.connect, dentona is creating a space for honest discussion about technologies, workplace culture and the future ...
    Read more
  • At the top, against a dark grey background, is the text “ dentona: The Dental Technology Magazine”. Below this, on a red background, is the main title “New Dimensions in Dental Technology” and the subtitle “Why origin is now part of a system”.
    LabMag 11 – The new coordinates of dental technology
    Julian Schaumann | 1 June 2026
    In recent issues, we have looked at decisions; at who modern dental technology reaches. This time, we are taking it a step further: much of what appea...
    Read more
  • Two thermoelastic blanks from optimill for dental applications: pink “memopink” and white “memosplint ”. Details: jaw model with pink gums, yellow teeth and a transparent dental splint.
    dentona Expands blank production in Lippendorf by 60 per cent
    Julian Schaumann | 9 May 2026
    dentona AG is significantly expanding its production capacity for polymer-based milling blanks at its Lippendorf site near Leipzig. By increasing blan...
    Read more
  • A middle-aged man with glasses, grey hair and a beard smiles at the camera. He is wearing a light blue T-shirt and a black glove on his right hand, which is raised slightly in front of him. There is a lapel microphone attached to his collar.
    What really goes into a good 3D printing resin?
    Julian Schaumann | 29 April 2026
    Many dental laboratories and dental practices invest in 3D printers, optimise processes, replace hardware – and yet still encounter the same problems ...
    Read more
  • Front cover of dentona's LabMag for dental technology. Main headline: 'Dental prosthetics: price or perspective'. Subheading: 'Reality in the dental laboratory: foreign prosthetics, quotation logic and the gap between'. Red, black top.
    LabMag – Dental Prosthetics: Price or Perspective
    Julian Schaumann | 15 April 2026
    Reality in the dental laboratory: dental prosthetics from abroad, the logic of supply and the gap in betweenThe last issue dealt with access to care a...
    Read more
  • Two men are chatting at a bar table under a lamp. On the left, a man wearing glasses is gesturing; on the right, a bearded man is smiling. Glasses and a bottle are on the table, with ‘d.connect’ in the background.
    d.connect 2026: Future dialogue of dental technology in Dortmund
    Pia Kulas | 26 March 2026
    How is dental technology changing and what does this mean for dental laboratories? This is the question addressed by d.connect, a future dialogue to w...
    Read more
  • Cover page of “LabMag – The ‘dentona’ magazine for dental technology”: dark top, large red bottom. Main title: “The blind spot of dental technology”. Subtitle: Dental lab life – much is possible, but not everything.
    The blind spot of dental technology
    Julian Schaumann | 6 March 2026
    Today we are addressing a topic that touches on a blind spot in the industry - a topic that is often felt but rarely spoken about. Not because it is s...
    Read more
  • Two transparent spray bottles with white spray heads and labels on a dark, textured background. The larger one, labelled ‘optiprint iso 3D’, is at the front left; the smaller one is at the back right. A diagonal strip of light illuminates the background.
    Clean separation in the digital workflow
    Pia Kulas | 24 February 2026
    With optiprint iso 3D, dentona (Dortmund) is expanding the optiprint family with a pragmatic solution for everyday laboratory work: the isolation of p...
    Read more
Further contributions
More
  • Around 15 people are standing in a modern, bright room, looking left towards the speaker. A man in a light blue jacket gestures before a large blue board with a world map and text like ‘VISION’. Certificates are visible on the right.
    Recap: Why we travel all the way to China with our customers
    9 July 2026
    27 dental technicians, a week in China and countless new experiences: together with our long-standing partner Aidite, we at dentona organised a custom...
    Read more
  • A blonde woman with short hair is speaking on stage whilst wearing a headset. On the left, members of the audience are seated at a table. The ‘ dentona ’ logo is visible in the background.
    That was d.connect 2026: Anything is possible. So what next?
    6 July 2026
    Fully booked. Inspiring discussions. And plenty of new perspectives.  Dental technology has probably never been as advanced as it is today. Tha...
    Read more
  • LabMag cover: black top with logo + “dentona’s magazine for dental technology”; red bottom with “Who will be copying whom in future?” and “Dental technology in 2026 – an uncomfortable question”.
    LabMag: Who will be copying whom in the future?
    Julian Schaumann | 2 July 2026
    Artificial intelligence, automation, digital processes – we’ve covered these topics many times before. And yes: here we go again. Not because AI is a ...
    Read more
  • LabMagazin front cover: Dark grey top with white LabMag logo and ‘dentona’s magazine for dental technology’. Red section with articles ‘Next-gen dental technology’, ‘Dental prostheses: price or prospects’ and ‘The blind spot’. Email icon bottom right.
    LabMag: Between everyday lab life, high standards and change
    Julian Schaumann | 16 June 2026
    There are plenty of new products. What is rarely discussed honestly, however, are the tangible changes behind them. A digital magazine from dentona ad...
    Read more
  • A lecture in a large hall, viewed from the back of the audience. A speaker stands by a large screen, presenting on machine learning. The ceiling has red lights, pipes and ventilation ducts; the audience listens attentively.
    d.connect 2026: Anything is possible. So what now?
    Julian Schaumann | 12 June 2026
    Dental technology is changing. With d.connect, dentona is creating a space for honest discussion about technologies, workplace culture and the future ...
    Read more
  • At the top, against a dark grey background, is the text “ dentona: The Dental Technology Magazine”. Below this, on a red background, is the main title “New Dimensions in Dental Technology” and the subtitle “Why origin is now part of a system”.
    LabMag 11 – The new coordinates of dental technology
    Julian Schaumann | 1 June 2026
    In recent issues, we have looked at decisions; at who modern dental technology reaches. This time, we are taking it a step further: much of what appea...
    Read more
  • Two thermoelastic blanks from optimill for dental applications: pink “memopink” and white “memosplint ”. Details: jaw model with pink gums, yellow teeth and a transparent dental splint.
    dentona Expands blank production in Lippendorf by 60 per cent
    Julian Schaumann | 9 May 2026
    dentona AG is significantly expanding its production capacity for polymer-based milling blanks at its Lippendorf site near Leipzig. By increasing blan...
    Read more
  • A middle-aged man with glasses, grey hair and a beard smiles at the camera. He is wearing a light blue T-shirt and a black glove on his right hand, which is raised slightly in front of him. There is a lapel microphone attached to his collar.
    What really goes into a good 3D printing resin?
    Julian Schaumann | 29 April 2026
    Many dental laboratories and dental practices invest in 3D printers, optimise processes, replace hardware – and yet still encounter the same problems ...
    Read more
  • Front cover of dentona's LabMag for dental technology. Main headline: 'Dental prosthetics: price or perspective'. Subheading: 'Reality in the dental laboratory: foreign prosthetics, quotation logic and the gap between'. Red, black top.
    LabMag – Dental Prosthetics: Price or Perspective
    Julian Schaumann | 15 April 2026
    Reality in the dental laboratory: dental prosthetics from abroad, the logic of supply and the gap in betweenThe last issue dealt with access to care a...
    Read more
  • Two men are chatting at a bar table under a lamp. On the left, a man wearing glasses is gesturing; on the right, a bearded man is smiling. Glasses and a bottle are on the table, with ‘d.connect’ in the background.
    d.connect 2026: Future dialogue of dental technology in Dortmund
    Pia Kulas | 26 March 2026
    How is dental technology changing and what does this mean for dental laboratories? This is the question addressed by d.connect, a future dialogue to w...
    Read more
  • Cover page of “LabMag – The ‘dentona’ magazine for dental technology”: dark top, large red bottom. Main title: “The blind spot of dental technology”. Subtitle: Dental lab life – much is possible, but not everything.
    The blind spot of dental technology
    Julian Schaumann | 6 March 2026
    Today we are addressing a topic that touches on a blind spot in the industry - a topic that is often felt but rarely spoken about. Not because it is s...
    Read more
  • Clear aligners are hanging upside down to dry. Water droplets glisten on the surface above a white collection tray; in the background, parts of the equipment are visible out of focus.
    Splints from the 3D printer: A field report from everyday laboratory work
    Pia Kulas | 10 February 2026
    3D printing is an integral part of splint production in many dental laboratories. In addition to efficiency and material savings, one central question...
    Read more
Free shipping
from 300 € / net
Product innovations in the
dental model fabrication
Comprehensive
training programme
Personalised advice
On-site service