Die stones type 4

ZERO rock®


Product number: 12061

In stock

Free shipping from 300 € net
Delivery time approx. 1 - 3 workdays
Product information "ZERO rock®"

ZERO rock® is a special super hard stone without expansion for all saw and full models. Optimized for large-span implant and bridge work.

Special properties:

- Thixotropic consistency

- Ideal final hardness

- 0,00% expansion

Abbindezeit: ca. 15 min.
Anmischverhältnis: 21 ml : 100g
Expansion DIN: 0,00 %
Härte 24 h: > 280 N/mm²
Härte 30/60 min: ca. 180 / 250 N/mm²
Rührzeit (masch.): 60 s
Verarbeitungszeit: ca. 8 min.
Manufacturer "dentona"


Numerous innovations for dental model production have distinguished dentona for decades. Our dental research findings are translated into high-quality special products for dental laboratories. For dental plasters from dentona, special plasters are produced from selected raw materials in standardized processes with material tests far beyond the DIN requirements in order to guarantee the promised product properties of the dental plasters. After decades of producing special dental plasters, the production of our own silicones was the logical consequence in order to meet the ever-increasing demands of dental laboratories in terms of processing quality and physical properties with consistent quality. Dental model systems are optimized for dental laboratories by dentona's innovative plastic base system with a further developed connection technique between split cast plates and base plates. The high-quality special investment materials for crown and bridge as well as model casting techniques meet the highest requirements for rapid casting processes as well as conventional heating technology and round off the dental casting technique with the dentona abrasive.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Kunden kauften auch

hydro-stone® 200 was developed as the world's first special plaster for counter-bite impressions made from alginate. hydro-stone® 200 is a special super hard stone according to DIN EN ISO 6873: 2013, type 4, low thixotropic, fast-setting, optimized for alginate and hydrophilized silicone impression materials for counter bites, plastic dentures, model casting and orthodontics.

Variants from €31.80*
From €83.70*
The first clear-flexible 3D resin for bite splints Our new optiprint clara consists of high mechanical strength in printed splints and thus offers break resistance and flexibility in the patient's mouth. With this new material development, there is no risk of flaking or splint breaks in the patient's mouth. optiprint clara is mouth-resistant and tasteless. This material advantage leads to 100% satisfaction for both the practitioner and the patient.

Variants from €147.30*
From €267.50*
With ZERO arti® you get 100% precision when mounting models in the articulator. ZERO arti® has very good adhesive strength and sets quickly.ZERO arti® is the first special articulation plaster (mounting plaster) with 0.00% expansion.

Variants from €27.80*
From €63.40*

Kunden haben auch gesehen

Light curing device for the polymerisation of 3D printed components in just 6 - 10 minutes. The powerful LEDs used in the unit, in combination with a heater and a vacuum, ensure 360° homogeneous curing in the UVA and UVB range.

hydro-base®300 is a special die stone according to DIN EN ISO 6873: 2013, type 4, low thixotropic, fast setting, early removal, particularly suitable for all water-based and hydrophilic impression materials for all saw models, counterbite and diagnostic models (functional diagnostics).

optimill SHTC (Super-High-Translucent-Colored) is a premium product made of highly translucent zirconium oxide for natural-looking restorations. The homogeneously colored blanks are available in 16 shades analogous to the VITA Classic shade system. They are used as monolithic dentures or as an excellent basis for reduced frameworks with minimal layering. Thanks to the high level of color reliability and the lower cost of customization, you can achieve highly aesthetic results quickly and in a targeted manner. Advantages: Color and process reliability thanks to homogeneous coloring ensures consistent color results - even when regrinding the frameworkEconomical by eliminating the dipping process and the use of coloring liquidsProvides natural-looking aesthetic results for monolithic restorations

Variants from €84.00*
From €123.20*
esthetic-base® B.C. is a special die stone according to DIN EN ISO 6873: 2013, type 4, and is based on a special formulation, is highly thixotropic and can be removed quickly from the impression. Optimized for cameras and scanners with short-wave blue light.

Variants from €53.40*
From €155.20*
Unique for model bases! The latest development from our dentona® laboratory: sockel-plaster® GT exact is the first liquid base plaster with an expansion of less than 0.02% according to DIN EN ISO 6873: 2013, type 4 - for very precise Pindex models with the base casting technique. The unique combination of outstanding physical properties, such as extremely low expansion and elegant coloring, is unmatched to date. Your advantages:optimal proximal contacts and best fiteasy processing thanks to the low viscositybeautiful, elegant colors

Variants from €30.10*
From €75.30*
Fast super hard stone for creative dental technicians for repairs, counter bites and splint work! The special feature is that it can be removed from the impression after just 10 minutes. This is how you get the most out of your work and save valuable time. The shorter setting time makes it particularly suitable for alginate impressions. Special super hard stone according to ISO 6873: 2013, type 4, can be removed from the impression very quickly - after 10-15 min. for splints, counterbites, repairs, plastic dentures, optimized for alginate.

From €52.50*
Free shipping
from 300 € / net
Product innovations in the
dental model fabrication
training program
Individual advice
On-site service